Decorative concrete adds interest to your Christchurch garden
Decorative concrete puts the finishing touches on your outdoor space, adding colour and interest to parts of your garden. This type of concrete is an excellent choice for patios, pool surrounds and pathways.
Through years of experience, Frank has an eye for design ideas to suit your property and budget. We'll arrange an on-site consultation with you to discuss your plans and then draw up a quote for you. To discuss your options, get in touch. We work with clients across Christchurch and the wider Canterbury region.
© 2026 Allways Concrete Ltd. 6 Anfield Way, Lincoln, Christchurch 027 2740 342 Powered by Web Genius.
Page: Textured Concrete Christchurch - Concrete Polishing, Sealing - Last updated: 1st July, 2026
Textured Concrete
One way to create texture is by using stamped concrete. While the poured concrete is still wet, we use a stamp such as a cobblestone pattern to add texture.
One way to create texture is by using stamped concrete. While the poured concrete is still wet, we use a stamp such as a cobblestone pattern to add texture.
Decorative Cut Concrete
Patterns can be created in the concrete by making decorative cuts. These are not the same as expansion cuts that help minimise random cracking but are designed to create a stylish finish.
Patterns can be created in the concrete by making decorative cuts. These are not the same as expansion cuts that help minimise random cracking but are designed to create a stylish finish.
Coloured Concrete
Match your concrete with the colour scheme of your property. We can create different colours by mixing a coloured powder into the concrete mixture. Concrete dyes provide a more vibrant colour than stains.
Yes. Usually we will come back for concrete sealing 7-10 days after pouring. The surface must be dry and the ground temperature must be above ten degrees. Unsealed concrete is porous and therefore more susceptible to permanent marks or stains. Avoid walking on the surface until the seal is applied and dried.
We cannot guarantee that there will be no cracks as it is a natural part of the drying process. We use standard techniques such as expansion cuts to help minimise any cracking. One way that we minimise unwanted cracking is through expansion cuts. We make expansion cuts a few days after pouring your concrete. These cuts provide a weak point where the concrete can expand and contract while relieving strain on the join. Ideally, cracking will occur in the cut rather than in random places. Expansion cuts are meant to minimise cracking without threatening the structural integrity of your concrete.
We cannot guarantee that the final look of your coloured concrete will be exactly the same as the sample but it will be very close. Different batches of concrete and weather conditions when the concrete is poured affect the final product.
Pavers are made from individual pieces of concrete which are than laid together and interlocked. Textured or stamped concrete is poured in one section and then stamped to give the appearance of separate pieces. Stamped concrete is usually easier and more cost-effective. However, if you would like to incorporate paving we do have paving contractors we can work with to create this for you.
You can help your concrete stay bright and appealing by cleaning it regularly with soapy water and a broom. You can also use a water blaster. Always clean up oil and petrol spills quickly. You can buy products at your local hardware store to treat difficult stains. Reseal your concrete every 2-3 years. Resealing helps preserve the colour, protects the glossy finish, and protects the surface from impurities.